Blue And White Ram Slots

Return to site

Blue And White Ram Slots

 Support VoyForums 
It doesn't really matter, but you should put it in the 1 & 3 slots, probably the blue slots in your case. However, if you're getting 4GB of RAM, DEFINITELY! Go for 2 x 2GB sticks. The reason there are 2 blue and 2 white, and not just 4 of the same color, is that when you have 2 RAM sticks in the same color slots, it runs in dual-channel mode. And I got RAM question, shall I put the memory sticks in SLOT 1/3 or stay with my current setup 2/4? Intel Core i7-4790 3.6g 1150 Asus Maximus VII Hero Z97 DDR3 1600 CORSAIR VENGEANCE LP 16GB (2X8) 240PIN DDR3 1600 SAPPHIRE RADEAON R9 380 NITRO 4GB DDR5 CRUCIAL BX100 250GB SATA3 SEASONIC 860W PLATINUM ACTIVE PFC:).
VoyForums Announcement: Programming and providing support for this service has been a labor of love since 1997. We are one of the few services online who values our users' privacy, and have never sold your information. We have even fought hard to defend your privacy in legal cases; however, we've done it with almost no financial support -- paying out of pocket to continue providing the service. Due to the issues imposed on us by advertisers, we also stopped hosting most ads on the forums many years ago. We hope you appreciate our efforts. Show your support by donating any amount. (Note: We are still technically a for-profit company, so your contribution is not tax-deductible.) PayPal Acct: Feedback: Voir plan salle casino de paris.
Donate to VoyForums (PayPal):
Casinos in Flint on YP.com. See reviews, photos, directions, phone numbers and more for the best Casinos in Flint, MI. There are 22 Casinos in or near Flint, Michigan MI. Aaa Insurance is located approximately 51 miles from Flint. They're a really good Casino. Closest casino to flint michigan mi. Casinos near Flint, MI Browse URComped's up-to-date list of the 50 closest casinos to Flint, MI There are not many casinos near Flint, MI but if you're willing to travel a bit you can browse our list of casinos by state. Best Casinos in Flint, MI - Josh and the crew are great. Facility is spotless and well taken care of. I've been to a bunch of other simulators in the area and Players is the best. Bar is stocked, beer is cold and music is spot on. You won't be disappointed!
[ Login ] [ Contact Forum Admin ] [ Main index ] [ Post a new message ] [ Search |Check update time | Archives:1, 2, 3, 4 ]
Blue And White Ram Slots SlotSubject: IGT double red white and blue / won't reset

Author:
JK9Jerry (confused)
[ Next Thread ||Oÿ�.html'>Previous Thread |Next Message |Previous Message] Date Posted:18:16:37 11/29/10 Mon
I've played this machine for several years with no problems.But all at once I close the door after retrieving some coins and nothing happens.No lights on control panel/ no lights on error l.e.d./ nothing.I've checked door switch and fuses.The fuses are good.The door switch is a photo cell and appears to be ok.Any help would sure be apreciated.
[Next Thread ||Oÿ�.html'>Previous Thread |Next Message |Previous Message]

Replies:[> Subject: Re: IGT double red white and blue / won't reset 

Author:
Jeremy
[ Edit | View ]Date Posted:20:25:55 11/29/10 Mon
It looks like a power supply problem. Do the main florescent light come on if they do then the main transformer is most likely good. A common power problem with the S-Plus is the power plug that plugs into the motherboard. It is usually white plug with I think 5 or 7 pins. I would have to look it up for the exact pins but it is easy to spot as it will be the only plug coming from the power box to the motherboard. These pins will 1. Have a bad pin not connecting well or 2. Often the pins on the motherboard where the pins plug into will come loose and need to be re-soldered. I often move the plug slightly just to see if I get power but that could potentially cause a spike and more problems so you may want to just examine it. Either way this plug should be given the machine power. I think 5 and 12 volts is what it should be supplying. 
Other things that could cause your problems are a bad MPU but this usually will leave just a zero on the game. A Bad motherboard which mainly consist of the plug I was talking about and then just a bunch of traces. And lastly wiring or the power box which rarely go bad but as these games age could be a problem. The main power switch could have a problem to and may need to be looked at.
[ Post a Reply to This Message ]
[> [> Subject: Re: IGT double red white and blue / won't reset 

Author:
james slone (little less confused)
[ Edit | View ]Date Posted:18:00:43 11/30/10 Tue
>It looks like a power supply problem. Do the main
>florescent light come on if they do then the main
>transformer is most likely good. A common power
>problem with the S-Plus is the power plug that plugs
>into the motherboard. It is usually white plug with I
>think 5 or 7 pins. I would have to look it up for the
>exact pins but it is easy to spot as it will be the
>only plug coming from the power box to the
>motherboard. These pins will 1. Have a bad pin not
>connecting well or 2. Often the pins on the
>motherboard where the pins plug into will come loose
>and need to be re-soldered. I often move the plug
>slightly just to see if I get power but that could
>potentially cause a spike and more problems so you may
>want to just examine it. Either way this plug should
>be given the machine power. I think 5 and 12 volts is
>what it should be supplying. 
>
>Other things that could cause your problems are a bad
>MPU but this usually will leave just a zero on the
>game. A Bad motherboard which mainly consist of the
>plug I was talking about and then just a bunch of
>traces. And lastly wiring or the power box which
>rarely go bad but as these games age could be a
>problem. The main power switch could have a problem to
>and may need to be looked at.
Jeremy/ First thanks a lot for your prompt reply.Sorry I neglected to say that yes the florescents do light up.I checked the power plug to the mpu and found what looks like one of the leads had gotten hot (brown discoloration)so I cleaned and replugged properly (was not seated before)but still no power up.Not sure if this was a problem or not.Can you advise on what I could check next?
[ Post a Reply to This Message ]
[> [> [> Subject: Re: IGT double red white and blue / won't reset 

Author:
JK9Jerry (happy)
[ Edit | View ]Date Posted:17:39:35 12/01/10 Wed
>>It looks like a power supply problem. Do the main
>>florescent light come on if they do then the main
>>transformer is most likely good. A common power
>>problem with the S-Plus is the power plug that plugs
>>into the motherboard. It is usually white plug with I
>>think 5 or 7 pins. I would have to look it up for the
>>exact pins but it is easy to spot as it will be the
>>only plug coming from the power box to the
>>motherboard. These pins will 1. Have a bad pin not
>>connecting well or 2. Often the pins on the
>>motherboard where the pins plug into will come loose
>>and need to be re-soldered. I often move the plug
>>slightly just to see if I get power but that could
>>potentially cause a spike and more problems so you may
>>want to just examine it. Either way this plug should
>>be given the machine power. I think 5 and 12 volts is
>>what it should be supplying. 
>>
>>Other things that could cause your problems are a bad
>>MPU but this usually will leave just a zero on the
>>game. A Bad motherboard which mainly consist of the
>>plug I was talking about and then just a bunch of
>>traces. And lastly wiring or the power box which
>>rarely go bad but as these games age could be a
>>problem. The main power switch could have a problem to
>>and may need to be looked at.
>Jeremy/ First thanks a lot for your prompt reply.Sorry
>I neglected to say that yes the florescents do light
>up.I checked the power plug to the mpu and found what
>looks like one of the leads had gotten hot (brown
>discoloration)so I cleaned and replugged properly (was
>not seated before)but still no power up.Not sure if
>this was a problem or not.Can you advise on what I
>could check next?
Jeremy/ While following your suggestion on checking the voltage to mpu the pressure from my probe was enough to help make contact and the rascal fired.I found that by inserting on carefully it maintains contact and should be fine till I can locate a replacement.Thank you for all your help.
[ Post a Reply to This Message ]
[> [> [> [> Subject: Re: IGT double red white and blue / won't reset 

Author:
Jeremy
[ Edit | View ]Date Posted:20:09:27 12/01/10 Wed
You got it that's great. As I mentioned in an early post I often used to wiggle that plug around to see if the machine got power. But this could cause a spike and damage the MPU. At least you know what it is and it is an easy fix. The hard part would be taking out the motherboard soldering the pin on the back is very easy once out. And repining the pin which may be a bit hard without the right tools but is fairly straight forward.
[ Post a Reply to This Message ]
[> Subject: Re: IGT double red white and blue / won't reset 

Author:
Jeremy
[ Edit | View ]Date Posted:19:15:23 11/30/10 Tue
If the plug was discolored it could be the problem. The pins on the mother board where it plugs in may have come loose and need to be soldered again. This would require taking out the motherboard though. 
If you have a multi meter try to read the voltage at the plug. I donâ€™t have a manual for the exact voltages and pins with me but they will be 7 VAC and two 24 VAC with a ground wire and one wire not connected if I remember right. The main thing is to see if you are getting voltage up to that point if not it could possibly be something before the motherboard plug. Although since the games florescent lights are coming on I doubt it is the transformer and it cannot be the main power switch so other than a loose connection I think you will see voltage at the motherboard plug. But it doesnâ€™t hurt to check. 
Once the motherboard gets power there should be at least a zero displayed on the LED. There have been rare cases where a motherboard or MPU can cause the LED to not light up but that is very rare. 
Something to keep in mind is it may be something else, possibly even simple. Such as the connection to the LED itself. One way to see if the LED has gone bad is to see if the game wants to play in the dark so to speak. If the machines reels spin when you close the door try to insert a coin and hit the spin button if the game plays there is a LED problem. This may be a long shot but does happen.
[ Post a Reply to This Message ]
[> Subject: IGT red white and blue 5cent machine/ won't reset 

Author:
Stanley Fejdasz (Mr Stan)
[ Edit | View ]Date Posted:12:48:46 01/08/11 Sat
>I've played this machine for several years with no
>problems.But all at once I close the door after
>retrieving some coins and nothing happens.the lights stay on. on the counter it says #12 I talked to some one that used to repair slot machines and he said that it's Low Battary Voltage. I live in Sun City West Az.
[ Post a Reply to This Message ]
[> Subject: Re: IGT double red white and blue / won't reset 

Author:
Jeremy
[ Edit | View ]Date Posted:18:02:43 01/08/11 Sat
An IGT S-Plus game with a 12 tilt is a low battery which is a relatively easy replacement. The battery is located on the MPU and is soldered onto the board. It takes very minimal soldering skills to remove it and solder anther battery into place. Once the battery is replaced a 61 tilt code will display hold the white self test switch inside the machine for three seconds close the door and turn the outside reset key and the game should be operating after that.
[ Post a Reply to This Message ]
Post a message:
This forum requires an account to post.
 [ Create Account ]
 [ Login ]
[ Contact Forum Admin ]
Forum timezone: GMT-8
VF Version: 3.00b, ConfDB:
Before posting please read our privacy policy.
VoyForums(tm) is a Free Service from Voyager Info-Systems.
Copyright © 1998-2019 Voyager Info-Systems. All Rights Reserved.

Blue And White Ram Slots Free PlayBlue And White Ram Slots No Deposit

Blue And White Ram Slots Freecarlos_9 New Member 
Hi and thank you.
I builded 1 year my own PC, Specs:
CPU: Intel® Core™ i7-4790K ~4.0Ghz
RAM: Crucial Ballistix Sport 8GB (2 x 4GB) 1600Mhz
PSU: Thermaltake SMART M Series SP-850M 850W
MOBO: MSI Z97 PC MATE
WC: CORSAIR H80i
Since 6 months ago i was having a trouble: Sometimes when i was turning it on, it turned on and off repeatedly, the solution was: Remove the CMOS battery. 1 week ago a decide to clean it up, then i put everything back, and when i turned on, i got the problem, but this time removing the CMOS battery didn't work, i bought 12GB ram (1x8gb, 1x4GB Crucial Ballistix Sport @1600ghz), and helped me to understand what going on: Channel B (3 and 4 slots, counting from left to right) wasn't working right.
RAM in slot 1 only = boot 
RAM in slot 2 only = boot
RAM in slot 3 only = turned on and off repeatedly
RAM in slot 4 only = turned on and off repeatedly
RAM in slot 1&2 only = boot
RAM in slot 1&3 only = turned on and off repeatedly
RAM in slot 1&4 only = turned on and off repeatedly
RAM in slot 2&3 only = turned on and off repeatedly
RAM in slot 2&4 only = turned on and off repeatedly
RAM in slot 3&4 only = turned on and off repeatedly
RAM in slot 1,2,3, and 4 = Boot (No display, keyboard and mouse were not lighting)
I tried: 
Update to latest BIOS version
Clean slots with Contact cleaner (DeoxIT D5)
I don't know how to check voltage, etc.
Thank you so much 

[> Subject: IGT red white and blue 5cent machine/ won't reset
Author: Stanley Fejdasz (Mr Stan) [ Edit \| View ]	Date Posted:12:48:46 01/08/11 Sat >I've played this machine for several years with no >problems.But all at once I close the door after >retrieving some coins and nothing happens.the lights stay on. on the counter it says #12 I talked to some one that used to repair slot machines and he said that it's Low Battary Voltage. I live in Sun City West Az. [ Post a Reply to This Message ]